Upgrading AEN#

CAUTION: These instructions are for upgrading AEN to the current version 4.2.2 from 4.2.1 ONLY. Each version must be upgraded iteratively from the previous version. Do not skip versions.

Upgrade instructions for previous versions:

For upgrades from versions before those listed above, please contact your enterprise support representative.

NOTE: Named Service Account functionality is available with AEN 4.0.0+ for new installations only. It is not available for upgraded installations. Contact your enterprise support representative for more information.

An AEN platform update requires that each instance of the 3 node types be upgraded individually:

AEN Server
AEN Gateway
AEN Compute

The upgrade process requires that all AEN service instances be stopped, upgraded, and then restarted.

NOTE: Any commands that call for the root user can also be done using sudo.

If you encounter any difficulty during the upgrade process, see Troubleshooting which provides guidance on:

processes
configuration files
log files
ports

If you are unable to resolve an installation or upgrade problem, please contact your enterprise support representative.

Before you upgrade#

CAUTION: Make a tested backup of your installation before starting the upgrade. Upgrading to a higher version of AEN is not reversible. Any errors during the upgrade procedure may result in partial or complete data loss and require restoring data from backups.

CAUTION: Terminate all AEN applications and stop all projects before starting the upgrade process.

Before upgrading each service on each host:

Suspend the services on each of the nodes:

sudo service wakari-server stop
sudo service wakari-gateway stop
sudo service wakari-compute stop

Set the AEN Functional ID (“NFI”) and AEN Functional Group (“NFG”) to the NFI and NFG of the current installation:
```
export AEN_SRVC_ACCT="wakari"
export AEN_SRVC_GRP="wakari"
```
NOTE: The default NFI is wakari, but aen_admin or any other name may be used instead.

For more information on NFI and NFG, see the installation instructions.
Install wget:
```
yum install wget
```

Upgrading the AEN server node#

NOTE: If you are using LDAP-based authentication, back up the /opt/wakari/wakari-server/etc/wakari/wk-server-config.json configuration file. After the server has been upgraded, copy that file back into the same location as before the upgrade.

Complete the following steps on the server host:

Stop the Elasticsearch service:
```
sudo service elasticsearch stop
```

Remove any previous index:

sudo rm -rf /var/lib/elasticsearch/*

NOTE: You can choose to keep the old index, but if you detect any issues with the search capabilities after the upgrade, you will need to run the following to start with a clean index:

sudo service wakari-server stop
sudo service elasticsearch stop
sudo rm -rf /var/lib/elasticsearch/*
sudo service elasticsearch start
sudo service wakari-server start

Upgrade the server:

pushd /tmp
wget http://j.mp/aen-server-update-4_2_2

sudo -E -u $AEN_SRVC_ACCT /opt/wakari/miniconda/bin/conda install \
                -p /opt/wakari/wakari-server          \
                --file aen-server-update-4_2_2

sudo -E -u $AEN_SRVC_ACCT /opt/wakari/miniconda/bin/conda install \
                 -p /opt/wakari/wakari-server          \
                 --no-deps                             \
                 wakari-enterprise-server-conf-update=2.0.9
popd

Start Elasticsearch:
```
sudo service elasticsearch start
```
Or, if you do not want to use the search features, edit your server’s /opt/wakari/wakari-server/etc/wakari/config.json file by adding the line "SEARCH_ENABLED": false.
Restart the NGINX server:

AEN server version >= 4.1.3 uses Unix sockets for communication with NGINX. Restart NGINX to load this new configuration:
```
sudo service nginx restart
```
Alternatively, you can restart NGINX with:
```
sudo nginx -s stop
sudo nginx
```
Start the server:
```
sudo service wakari-server start
```
Check that the server is running properly:
```
sudo service wakari-server status
```
If you see NGINX errors, please check the configuration at /opt/wakari/wakari-server/etc/nginx/conf.d/www.enterprise.conf:18.
Connect to AEN server using your web browser with the correct protocol (http or https), hostname and port number.

Upgrading the AEN gateway node#

Complete the following steps on each gateway host:

Upgrade the gateway:

pushd /tmp
wget http://j.mp/aen-gateway-update-4_2_2

sudo -E -u $AEN_SRVC_ACCT /opt/wakari/miniconda/bin/conda install \
                -p /opt/wakari/wakari-gateway         \
                --file aen-gateway-update-4_2_2

sudo -E -u $AEN_SRVC_ACCT /opt/wakari/miniconda/bin/conda install \
                -p /opt/wakari/wakari-gateway         \
                --no-deps                             \
                wakari-enterprise-gateway-conf-update=2.0.9
popd

Start the gateway:
```
sudo service wakari-gateway start
```
Check that the gateway is running properly:
```
sudo service wakari-gateway status
```
Connect to the gateway using your web browser with the correct http/https, hostname and port number.

Upgrading AEN compute nodes#

Complete the following steps on each host where an AEN compute service is running:

Check for any wakari-indexer processes running:
```
ps aux | grep wakari-indexer
```
NOTE: If you stopped all the projects, you will not see any wakari-indexer processes running.

Terminate any remaining wakari-indexer processes:
```
sudo killall wakari-indexer
```
NOTE: The processes killed with killall are run by the $AEN_SRVC_ACCT user, so they can be killed as root with sudo killall or killed as the $AEN_SRVC_ACCT user with sudo -u $AEN_SRVC_ACCT killall. Example commands show the sudo killall option.

Check for any AEN applications processes running—Workbench, Viewer, Terminal or Notebook:

ps aux | grep wk-app-gateone
ps aux | grep wk-app-workbench
ps aux | grep wk-app-viewer
ps aux | grep wk-app-terminal
ps aux | grep jupyter-notebook

NOTE: If you stopped all the projects, you will not see any AEN app processes running.

Terminate any remaining AEN application processes by running one or more of the following:

sudo killall wk-app-gateone
sudo killall wk-app-workbench
sudo killall wk-app-viewer
sudo killall wk-app-terminal
sudo killall jupyter-notebook

Verify the contents of /opt/wakari/anaconda/.condarc. Modify it to contain the following entries, and possibly others if you customized the .condarc file.

NOTE: Modify the file as the AEN_SRVC_ACCT user (or be sure to keep the same ownership).
```
channels:
  - https://conda.anaconda.org/t/<TOKEN>/anaconda-nb-extensions
  - r
  - https://conda.anaconda.org/wakari
  - defaults

create_default_packages:
  - anaconda-client
  - ipykernel
```
NOTE: Contact your enterprise support representative to get your token for the Anaconda channel referenced above. Replace <TOKEN> with the actual token from your enterprise support representative.

Upgrade Anaconda in the root environment:

pushd /tmp
wget http://j.mp/aen-anaconda-update-4_2_2

sudo -E -u $AEN_SRVC_ACCT /opt/wakari/anaconda/bin/conda install \
              -p /opt/wakari/anaconda              \
              --file aen-anaconda-update-4_2_2
popd

Upgrade each compute service:

pushd /tmp
wget http://j.mp/aen-compute-update-4_2_2

sudo -E -u $AEN_SRVC_ACCT /opt/wakari/anaconda/bin/conda install \
                -p /opt/wakari/wakari-compute        \
                --file aen-compute-update-4_2_2

sudo -E -u $AEN_SRVC_ACCT /opt/wakari/anaconda/bin/conda install \
                --no-deps                            \
                -p /opt/wakari/wakari-compute        \
                wakari-enterprise-compute-conf-update=2.0.13
popd

NOTE: When upgrading the wakari-compute environment, you may see ImportError warnings with some nbextensions. As long as the Validating message is OK, the ImportError warnings are harmless—a consequence of the post-link presence on those packages.

Initialize the root environment to prime the package cache:

sudo -E -u $AEN_SRVC_ACCT /opt/wakari/anaconda/bin/conda create \
                -p /opt/wakari/testenv \
                --clone root

Test the offline cloning step:

sudo -E -u $AEN_SRVC_ACCT /opt/wakari/anaconda/bin/conda create \
                -p /opt/wakari/testenvoffline \
                --clone root --offline

Remove the test environments:

sudo rm -rf /opt/wakari/testenv
sudo rm -rf /opt/wakari/testenvoffline

Install necessary dependencies:

NOTE: Skip this step if you already have these dependencies installed from previous installations.
```
sudo yum groupinstall "X Window System" -y
sudo yum install git -y
```
NOTE: If you don’t want to install the whole X Window System, you must install the following packages to have R plotting support:
```
sudo yum install -y libXrender libXext libXdmcp libSM libICE libXt \
dejavu-sans-fonts dejavu-serif-fonts dejavu-fonts-common \
fontpackages-filesystem
```
Start the compute service:
```
sudo service wakari-compute start
```
Verify the compute service is running properly:
```
sudo service wakari-compute status
```
Restart the AEN Server with:
```
sudo service wakari-server restart
```
Repeat this upgrade procedure for all compute nodes in your Data Center.

After upgrading#

Restart the projects and start using AEN applications.
If you have a customized default environment, you may choose to upgrade it depending on the needs of your users.

Upgrade the customized default environment at /opt/wakari/anaconda/envs/default with the $AEN_SRVC_ACCT user:
```
pushd /tmp
wget http://j.mp/aen-anaconda-update-4_2_2

sudo -E -u $AEN_SRVC_ACCT /opt/wakari/anaconda/bin/conda install \
        -p /opt/wakari/anaconda/envs/default \
        --file aen-anaconda-update-4_2_2
popd
```
To upgrade the customized default environments for every user and every project at /projects/<USER>/<PROJECT>/envs/default, run these commands for every user as that user:
```
pushd /tmp
wget http://j.mp/aen-anaconda-update-4_2_2

sudo -E -u <USER> /opt/wakari/anaconda/bin/conda install \
        -p /projects/<USER>/<PROJECT>/envs/default \
        --file aen-anaconda-update-4_2_2
popd
```
NOTE: Replace <USER> with the user’s name. Replace <PROJECT> with the project name.

NOTE: Upgrading the default environment at /opt/wakari/anaconda/envs/default does NOT automatically upgrade the default environment in the users pre-existing projects. For pre-existing projects, the upgrade, if requested, should be done on a per-user basis.

NOTE: These commands update packages listed in aen-anaconda-update-4_2_2 and do not update any other package.
If you did not stop all your projects before upgrading, then the first time you start an application you will see an error page requesting that you restart the application.
Restart the application to complete the upgrade.
If you still see old applications or icons after restart, reload the page to reset the browser cache.